編號 |
中文名稱 |
英文名稱 |
IEC 60601-2-22-1995 |
醫用電氣設備 第2-22部分:診斷和治療用
雷射設備安全的特殊要求
|
Medical electrical equipment - Part 2:
Particular requirements for the safety of
diagnostic and therapeutic laser equipment
|
IEC 60747-5-4-2006 |
半導體器件.分立器件.第5-4部分:光電器件.半導體雷射器
|
Semiconductor devices - Discrete devices - Part
5-4: Optoelectronic devices - Semiconductor
lasers |
IEC 60825-1 AMD 1-1997 |
雷射產品的安全 第1部分:設備分類、要求和使用者指南
修改1 |
Safety of laser products - Part 1: Equipment
classification, requirements and user's guide;
Amendment 1 |
IEC 60825-1 AMD 2 Corrigendum 1-2002
|
雷射產品的安全.第1部分:設備分類、要求和使用者指南.修改件2
|
Safety of laser products - Part 1: Equipment
classification, requirements and user's guide;
Amendment 2 |
IEC 60825-1 AMD 2-2001 |
雷射產品的安全 第1部分:設備分類、要求和使用者指南
修改2 |
Safety of laser products - Part 1: Equipment
classification, requirements and user's guide;
Amendment 2 |
IEC 60825-1 Edition 1.2-2001 |
雷射產品的安全.第1部分:設備分類、要求和使用者指南
|
Safety of laser products - Part 1: Equipment
classification, requirements and user's guide
|
IEC 60825-1-1993 |
雷射產品的安全 第1部分:設備分類、要求和使用者指南
|
Safety of laser products; part 1: equipment
classification, requirements and user's guide
|
IEC 60825-12-2005 |
雷射產品的安全.第12部分:用於資訊傳輸的自由空間光通信系統的安全
|
Safety of laser products - Part 12: Safety of
free space optical communication systems used
for transmission of information |
IEC 60825-2-2005 |
雷射產品的安全.第2部分:光纖通信系統的安全(OFCS)
|
Safety of laser products - Part 2: Safety of
optical fibre communication systems (OFCS)
|
IEC 60825-4-2006 |
雷射產品的安全.第4部分:雷射防護器
|
Safety of laser products - Part 4: Laser guards
|
IEC 60856 AMD 1-1991 |
預錄光學反射視訊光碟系統 “影音光碟” 50Hz/625行
PAL制 修改1
|
Pre-recorded optical reflective videodisk
system; "laser vision" 50 Hz/625 lines; PAL;
amendment 1 |
IEC 60856 AMD 2-1997 |
預錄光學反射視訊光碟系統 “影音光碟” 50Hz/625行
PAL制 修改2
|
Pre-recorded optical reflective videodisk system
"Laser vision" 50 Hz/625 lines - PAL; Amendment
2 |
IEC 60856-1986 |
預錄光學反射視訊光碟系統 “影音光碟” 50Hz/625行
PAL制 |
Pre-recorded optical reflective videodisk
system. "Laser vision" 50 Hz/625 lines - PAL
|
IEC 60857 AMD 1-1991 |
預錄光學反射視訊光碟系統 “影音光碟” 60Hz/525行
M/NTSC制 修改1
|
Pre-recorded optical reflective videodisk
system; "laser vision" 60 Hz/525 lines; M/NTSC;
amendment 1 |
IEC 60857 AMD 2-1997 |
預錄光學反射視訊光碟系統 “影音光碟” 60Hz/525行
M/NTSC制 修改2
|
Pre-recorded optical reflective videodisk system
- "Laser vision" 60 Hz/525 lines - M/NTSC;
Amendment 2 |
IEC 60857-1986 |
預錄光學反射視訊光碟系統 “影音光碟” 60Hz/525行
M/NTSC制 |
Pre-recorded optical reflective videodisk
system. "Laser vision" 60 Hz/525 lines - M/NTSC
|
IEC 61040-1990 |
激光輻射用功率和能量測量探測器、儀器和設備 |
Power and energy measuring detectors,
instruments and equipment for laser radiation
|
IEC 61096 AMD 1-1996 |
數位音訊雷射唱盤重放設備特性的測量方法 修改1
|
Methods of measuring the characteristics of
reproducing equipment for digital audio compact
discs; Amendment 1 |
IEC 61096-1992 |
數位音訊雷射唱盤重放設備特性的測量方法 |
Methods of measuring the characteristics of
reproducing equipment for digital audio compact
discs |
IEC 61280-1-4-2003 |
纖維光學通信子系統試驗程式.第1-4部分:一般通信子系統.多模纖維
雷射發射機用二維近場資料的採集和換算
|
Fibre optic communication subsystem test
procedures - Part 1-4: General communication
subsystems; Collection and reduction of
two-dimensional nearfield data for multimode
fibre laser transmitters |
IEC 61280-2-10-2005 |
纖維光學通信子系統試驗程式.第2-10部分:數位系統.雷射發射器的時間分辨線性調頻脈衝和α指數測量
|
Fibre optic communication subsystem test
procedures - Part 2-10: Digital systems -
Time-resolved chirp and alpha-factor measurement
of laser transmitters |
IEC 61751-1998 |
通信用雷射模組 可靠性評定 |
Laser modules used for telecommunication -
Reliability assessment |
IEC 62107-2000 |
高級影音光碟 光碟交換系統 規範 |
Super Video Compact Disc - Disc-interchange
system-specification |
IEC 62148-11-2003 |
光纖有源元件及器件.包裝和介面標準.第11部分:14針調製器集成
雷射二極體發射機
|
Fibre optic active components and devices -
Package and interface standards - Part 11:
14-pin modulator-integrated laser diode
transmitters |
IEC 62148-12-2004 |
纖維光學有源元件和器件.包裝和介面標準.第12部分:帶同軸RF連接器的
雷射傳輸器
|
Fibre optic active components and devices -
Package and interface standards - Part 12: Laser
transmitters with a coaxial RF connector
|
IEC 62149-3-2004 |
纖維光學有源元件和器件.性能標準.第3部分:2.5Gbit/s調製器-集成
雷射二極體發射機
|
Fibre optic active components and devices -
Performance standards - Part 3: 2,5 Gbit/s
modulator-integrated laser diode transmitters
|
IEC/TR 60825-10-2002 |
雷射製品的安全性.第10部分:IEC
60825-1的應用導則和注釋 |
Safety of laser products - Part 10: Application
guidelines and explanatory notes to IEC 60825-1
|
IEC/TR 60825-13-2006 |
雷射產品的安全.第13部分:雷射產品分類測量
|
Safety of laser products - Part 13: Measurements
for classification of laser products
|
IEC/TR 60825-14-2004 |
雷射產品安全.第14部分:使用者指南
|
Safety of laser products - Part 14: A user's
guide |
IEC/TR 60825-5-2005 |
雷射產品安全性.第5部分:IEC
60825-1的製造商檢查清單 |
Safety of laser products - Part 5:
Manufacturer's checklist for IEC 60825-1
|
IEC/TR 60825-8-1999 |
雷射產品的安全 第8部分:醫療
雷射設備安全使用指南
|
Safety of laser products - Part 8: Guidelines
for the safe use of medical laser equipment
|
IEC/TR 60825-9-1999 |
雷射產品的安全 第9部分:非相干光輻射最大允許曝光量的彙集
|
Safety of laser products - Part 9: Compilation
of maximum permissible exposure to incoherent
optical radiation |
IEC/TR3 60825-3-1995 |
雷射產品的安全 第3部分:雷射顯示器和指示器指南
|
Safety of laser products - Part 3: Guidance for
laser displays and shows |
ISO 10110-17-2004 |
光學和光學儀器.光學元件和系統製圖準備.第17部分:激光輻射損害閾
|
Optics and photonics - Preparation of drawings
for optical elements and systems - Part 17:
Laser irradiation damage threshold |
ISO 11145-2006 |
光學和光子學.雷射和雷射設備.詞彙和符號
|
Optics and photonics - Lasers and laser-related
equipment - Vocabulary and symbols |
ISO 11146-1-2005 |
雷射和雷射相關設備.雷射光束寬度、發散角和束擴散率的試驗方法.第1部分:無象散和簡單象散束
|
Lasers and laser-related equipment - Test
methods for laser beam widths, divergence angles
and beam propagation ratios - Part 1: Stigmatic
and simple astigmatic beams |
ISO 11146-2-2005 |
雷射和雷射相關設備.雷射光束寬度、發散角和束擴散率的試驗方法.第2部分:一般像散束
|
Lasers and laser-related equipment - Test
methods for laser beam widths, divergence angles
and beam propagation ratios - Part 2: General
astigmatic beams |
ISO 11151-1-2000 |
雷射和雷射設備 標準光學元件 第1部分:紫外線、可見和近紅外光譜範圍用元件
|
Lasers and laser-related equipment - Standard
optical components - Part 1: Components for the
UV, visible and near-infrared spectral ranges
|
ISO 11151-2-2000 |
雷射和雷射設備 標準光學元件 第2部分:紅外光譜範圍用元件
|
Lasers and laser-related equipment - Standard
optical components - Part 2: Components for the
infrared spectral range |
ISO 11252-2004 |
雷射和雷射設備.雷射裝置.對檔的最低要求
|
Lasers and laser-related equipment - Laser
device - Minimum requirements for documentation
|
ISO 11254-1-2000 |
雷射和雷射設備 光學表面雷射導致損傷閾值的測定 第1部分:1-on-1試驗
|
Lasers and laser-related equipment -
Determination of laser-induced damage threshold
of optical surfaces - Part 1: 1-on-1 test
|
ISO 11254-2-2001 |
雷射器和雷射相關設備 雷射導致光學表面損傷閾值的確定 第2部分:S-on-1
試驗 |
Lasers and laser-related equipment -
Determination of laser-induced damage threshold
of optical surfaces - Part 2: S-on-1 test
|
ISO 11551-2003 |
光學和光學儀器.雷射和雷射設備.光學
雷射元件光吸收性試驗方法
|
Optics and optical instruments - Lasers and
laser-related equipment - Test method for
absorptance of optical laser components
|
ISO 11553-1-2005 |
機械安全.雷射加工機械.第1部分:一般安全要求
|
Safety of machinery - Laser processing machines
- Part 1: General safety requirements
|
ISO 11554-2006 |
光學和光子學.雷射和雷射設備.雷射光束功率、能量和時間特徵的試驗方法
|
Optics and photonics - Lasers and laser-related
equipment - Test methods for laser beam power,
energy and temporal characteristics |
ISO 11670 Technical Corrigendum 1-2004
|
雷射和雷射相關設備.雷射光束參數的試驗方法.束位置穩定性.技術勘誤1
|
Lasers and laser-related equipment - Test
methods for laser beam parameters - Beam
positional stability; Technical Corrigendum 1
|
ISO 11670-2003 |
雷射和雷射設備.雷射光束參數的試驗方法.束定位穩定性
|
Lasers and laser-related equipment - Test
methods for laser beam parameters - Beam
positional stability |
ISO 11810-1-2005 |
雷射和雷射相關設備.手術布單和/或病人保護覆蓋物耐
雷射性的試驗方法和分類.第1部分:基本點燃和穿透性
|
Lasers and laser-related equipment - Test method
and classification for the laser resistance of
surgical drapes and/or patient protective covers
- Part 1: Primary ignition and penetration
|
ISO 11990-2003 |
光學和光學儀器.雷射和雷射設備.氣管柄
雷射抗性的測定
|
Optics and optical instruments - Lasers and
laser-related equipment - Determination of laser
resistance of tracheal tube shafts |
ISO 12005-2003 |
雷射和雷射設備.雷射光束參數的試驗方法.偏振
|
Lasers and laser-related equipment - Test
methods for laser beam parameters - Polarization
|
ISO 13320-1-1999 |
細微性分析 雷射衍射法 第1部分:一般原則
|
Particle size analysis - Laser diffraction
methods - Part 1: General principles
|
ISO 13694 Technical Corrigendum 1-2005
|
光學和光學儀器.雷射和雷射設備.雷射光束能量密度分佈的試驗方法.技術勘誤1
|
Optics and optical instruments - Lasers and
laser-related equipment - Test methods for laser
beam power (energy) density distribution;
Technical Corrigendum 1 |
ISO 13694-2000 |
光學和光學儀器 雷射和雷射設備 雷射光束能量密度分佈的試驗方法 |
Optics and optical instruments - Lasers and
laser-related equipment - Test methods for laser
beam power [energy] density distribution
|
ISO 13695-2004 |
光學和光子學.雷射及其相關設備.雷射光譜特性的試驗方法
|
Optics and photonics - Lasers and laser-related
equipment - Test methods for the spectral
characteristics of lasers |
ISO 13697-2006 |
光學和光子學.雷射和雷射相關的設備.光學
雷射元件的鏡面反射率和正透視度的試驗方法
|
Optics and photonics - Lasers and laser-related
equipment - Test methods for specular
reflectance and regular transmittance of optical
laser components |
ISO 13919-1-1996 |
焊接 電子束和雷射焊接頭 缺陷的品質分級指南 第1部分:鋼
|
Welding - Electron and laser-beam welded joints
- Guidance on quality levels for imperfections -
Part 1: Steel |
ISO 13919-2-2001 |
焊接 電子束和雷射光束焊接接頭 缺陷品質等級指南 第2部分:鋁及其可焊合金
|
Welding - Electron and laser beam welded joints;
Guidance on quality levels for imperfections -
Part 2: Aluminium and its weldable alloys
|
ISO 14408-2005 |
雷射手術用氣管掐管.標識及附帶資訊要求
|
Tracheal tubes designed for laser surgery -
Requirements for marking and accompanying
information |
ISO 15367-1-2003 |
雷射及雷射相關設備.雷射光束波前形狀測定用試驗方法.第1部分:術語和基礎領域
|
Lasers and laser-related equipment - Test
methods for determination of the shape of a
laser beam wavefront - Part 1: Terminology and
fundamental aspects |
ISO 15367-2-2005 |
雷射及雷射相關設備.雷射光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann感測器
|
Lasers and laser-related equipment - Test
methods for determination of the shape of a
laser beam wavefront - Part 2: Shack-Hartmann
sensors |
ISO 15609-4-2004 |
金屬材料的焊接程式規範和鑒定.焊接程式規範.第4部分:雷射光束焊接
|
Specification and qualification of welding
procedures for metallic materials - Welding
procedure specification - Part 4: Laser beam
welding |
ISO 15614-11-2002 |
金屬材料焊接程式的規範和鑒定.焊接程式試驗.第11部分:電子和雷射光束焊接
|
Specification and qualification of welding
procedures for metallic materials - Welding
procedure test - Part 11: Electron and laser
beam welding |
ISO 15616-1-2003 |
高品質焊接和切割用CO2雷射射線機的驗收試驗.第1部分:通用原理和驗收條件
|
Acceptance tests for CO<(Index)2>-laser beam
machines for high quality welding and cutting -
Part 1: General principles, acceptance
conditions |
ISO 15616-2-2003 |
高品質焊接和切割用CO2雷射射線機的驗收試驗.第2部分:靜態和動態準確度的測定
|
Acceptance tests for CO<(Index)2>-laser beam
machines for high quality welding and cutting -
Part 2: Measurement of static and dynamic
accuracy |
ISO 15616-3-2003 |
高品質焊接和切割用CO2雷射射線機的驗收試驗.第3部分:氣體流量和壓力測量儀的校正
|
Acceptance tests for CO<(Index)2>-laser beam
machines for high quality welding and cutting -
Part 3: Calibration of instruments for
measurement of gas flow and pressure
|
ISO 16063-11-1999 |
振動與衝擊感測器的校準方法 第11部分:雷射干涉法作主要的振動校準
|
Methods for the calibration of vibration and
shock transducers - Part 11: Primary vibration
calibration by laser interferometry |
ISO 16063-13-2001 |
振動和衝擊感測器的校準方法 第13部分:用
雷射干涉法的基本校準
|
Methods for the calibration of vibration and
shock transducers - Part 13: Primary shock
calibration using laser interferometry
|
ISO 17123-6-2003 |
光學和光學儀器.大地測量和測繪儀器的現場試驗規程.第6部分:旋轉雷射器
|
Optics and optical instruments - Field
procedures for testing geodetic and surveying
instruments - Part 6: Rotating lasers
|
ISO 17526-2003 |
光學和光學儀器.雷射器和雷射相關設備.雷射器的使用壽命
|
Optics and optical instruments - Lasers and
laser-related equipment - Lifetime of lasers
|
ISO 17658-2002 |
焊接.氧氣火焰切割、雷射光束切割和等離子體切割的缺陷
|
Welding - Imperfections in oxyfuel flame cuts,
laser beam cuts and plasma cuts - Terminology
|
ISO 18755-2005 |
細陶瓷(高級陶瓷、高級工業陶瓷).用
雷射閃光法測定塊體陶瓷的熱擴散
|
Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of thermal
diffusivity of monolithic ceramics by laser
flash method |
ISO 22826-2005 |
金屬材料焊縫的破壞性試驗.雷射和電子束焊接窄接頭的硬度試驗(維氏和努氏硬度試驗)
|
Destructive tests on welds in metallic materials
- Hardness testing of narrow joints welded by
laser and electron beam (Vickers and Knoop
hardness tests) |
ISO 22827-1-2005 |
Nd:YAG雷射射線焊接機器的加速試驗.帶光纖傳送的機器.第1部分:雷射裝配
|
Acceptance tests for Nd:YAG laser beam welding
machines - Machines with optical fibre delivery
- Part 1: Laser assembly |
ISO 22827-2-2005 |
Nd:YAG雷射射線焊接機器的加速試驗.帶光纖傳送的機器.第2部分:移動裝置
|
Acceptance tests for Nd:YAG laser beam welding
machines - Machines with optical fibre delivery
- Part 2: Moving mechanism |
ISO 2971-1998 |
捲煙和過濾嘴 公稱直徑的測定 使用雷射光束測量儀的方法 |
Cigarettes and filter rods - Determination of
nominal diameter - Method using a laser beam
measuring apparatus |
ISO 6161-1981 |
個人用護目鏡 防激光輻射的濾光鏡和護目鏡 |
Personal eye-protectors; Filters and
eye-protectors against laser radiation
|
ISO 8130-13-2001 |
粉末塗料 第13部分:採用雷射衍射的細微性分析
|
Coating powders - Part 13: Particle size
analysis by laser diffraction |
ISO/TR 11146-3 Technical Corrigendum 1-2005
|
雷射和雷射相關設備.雷射光束寬度、發散角度和束擴散率的試驗方法.第3部分:本征的和幾何的雷射光束分類、擴散和
|
Lasers and laser-related equipment - Test
methods for laser beam widths, divergence angles
and beam propagation ratios - Part 3: Intrinsic
and geometrical laser beam classification,
propagation and details of test methods;
Technical Corrigendum 1 |
ISO/TR 11146-3-2004 |
雷射和雷射相關設備.雷射光束寬度、發散角度和束擴散率.第3部分:內在和幾何雷射光束分類、擴散和試驗方法細節
|
Lasers and laser-related equipment - Test
methods for laser beam widths, divergence angles
and beam propagation ratios - Part 3: Intrinsic
and geometrical laser beam classification,
propagation and details of test methods
|
ISO/TR 11552-1997 |
雷射和雷射設備 雷射材料處理機械 性能規範和金屬材料切削基準 |
Lasers and laser-related equipment - Laser
materials-processing machines - Performance
specifications and benchmarks for cutting of
metals |
ISO/TR 11991-1995 |
上呼吸道雷射手術中通氣管理指南 |
Guidance on airway management during laser
surgery of upper airway |
ISO/TR 17671-6-2005 |
焊接.金屬材料焊接建議.第6部分:雷射光束焊接
|
Welding - Recommendations for welding of
metallic materials - Part 6: Laser beam welding
|
ISO/TR 22588-2005 |
光學和光子學.雷射和雷射相關設備.雷射光學元件感應吸收效應的測量和評估
|
Optics and photonics - Lasers and laser-related
equipment - Measurement and evaluation of
absorption-induced effects in laser optical
components |
ISO/TS 17477-2003 |
使用2維移動光學型雷射器的焊接和切割用CO2雷射光束機器的驗收試驗
|
Acceptance tests for CO<(Index)2>-laser beam
machines for welding and cutting using 2D moving
optics type |
編號 |
中文名稱 |
英文名稱 |