| 結構 (Structure) |
預冷箱 (Pre-cooling Zone) 預熱箱 (Pre-Heating Zone)
測試箱 (Testing Zone) 固定型態的物體測試 2 箱式
(Table 2-Zonetest For Stationary Object Test) |
| 內箱尺寸 (Inside Dimensions (W・D・H) cm) |
150X100X70 |
150X100X70 |
| 外箱尺寸 (Outside Dimensions (W・D・H) cm) |
252X255X218 |
251X267X220 |
| 內容積 (Inside Capacity) / 公升 (Litre) |
1050L |
| 氣門裝置 (Damper Device) |
強制的空氣裝置氣門 (Forced air Damper) |
| 內箱材料 (Interior Material) |
SUS#304 不鏽鋼 |
| 外箱材料 (Exterior Material) |
電鍍鋅版 + #304 不鏽鋼 + 9493 粉體塗裝 (SECC + SUS#304 + #9493 Power Coating) |
| 測試棚盤 (Railing Frame) |
不鏽鋼網架 (Stainless Steel Material Plate Or Net) |
| 冷凍系統 (Refrigeration) |
二元式 (Cascade Refrigeration System) |
| 冷卻方式 (Cooling Method) |
水冷 (Water Cooling) |
| 溫度範圍 (Temperature Range) |
| 預熱溫度 (Preheating Temperature) |
60℃～150℃ |
| 預冷溫度 (Precooling Temperature) |
-10℃～-45℃ |
| 高溫衝擊 (H.T. Shocking) |
+60℃～85℃ |
| 低溫衝擊 (L.T. Shocking) |
0℃～-30℃ |
| 預熱時間 (Preheating Time) |
40min |
| 預冷時間 (Precooling Time) |
50min |
| 溫度分佈均勻度 (Temperature Uniformity) |
±2.00℃以內 (Under ±2.00℃) |
| 模擬負載 (IC) (Simulated Load IC (kg)) |
200kg (含台車 60kg) |
| 覆歸時間 (Recovery Time) |
| 高溫衝擊二箱 (HT in 2-zone) |
-30℃～+85℃ / 5min |
| 低溫衝擊二箱 (HT in 2-zone) |
+85℃～-30℃ / 5min |
| 駐留時間 (Dwell Time) |
30min |
| 控制系統 (Control System) |
| 溫度感知器 (Sensor) |
PT 100 × 3 |
| 控制器 (Controller) |
IPC Based Touch Panel |
| 設定範圍 (Setting Range) |
Temperature:-70℃～+200℃ / Time: 0H1min～9999h 59min / Cycle: 9999Cycle |
| 解析度 (Resolution) |
Temperature: 0.01℃ / Time: 1 min |
| 輸出型式 (Output Mode) |
PID+PWM+SSR 控制模式 (Control Method) |
| 擴充性能 (Additional Capability) |
e化管理系統 |
